The Fargo 93672 HDP5600 built on five generations of proven retransfer technology, and supported by a comprehensive suite of integration tools, the affordable FARGO® HDP5600 Printer/Encoder produces High Definition IDs and cards with the highest image quality available. The HDP5600 is ideal for Government agencies, healthcare facilities, businesses and universities, who are looking for true “over the edge” printing capability. The HDP5600 with it’s convenient modularity allow it to be easily upgraded to meet expanded printing, lamination, or encoding requirements.
HDP5600 Standard Features:
This Fargo 93672 HDP5600 ID card printer utilizes a reverse image transfer (“over the edge”) printing process to produce vibrant, high definition, full color cards. All Fargo HDP5600 card printers can connect via USB or Ethernet (networked), and include a lifetime warranty on the printhead (three years for all other components with one year of free loaner coverage **USA only).
Reverse Image Transfer (Re-Transfer) Card Printing Technology
This ID card printer utilizes “Re-Transfer” printing technology, which diffuses ink (in the form of a ribbon) to a dye receptive film known as a “transfer film”. Once all necessary colors have been applied to the transfer film, it is then fused to a blank PVC or Composite card material. This two-step printing process allows for a high definition “over the edge” printed card. Since the transfer process is not limited by a fixed printhead, but rather utilizes the flexible transfer film material, the re-transfer method is ideal for highly detailed imagery (up to 600dots/in), which can be applied to uneven surfaces such as ID cards with embedded electronic chips (smart cards). Along with advanced printing definition and overall card coverage, the lifespan of a re-transfer printhead is dramatically increased by the lack of contact with the card substrate.
This ID card printer prints with a resolution of 600 dpi (dots per inch) or 23.6 dpm (dots per millimeter).
Dual Sided ID Card Printing
With a dual sided printing module, This ID card printer can automatically print on both sides of a PVC or Composite card.
Single Sided Lamination
This ID card printer incudes a single sided lamination module, which allows you to apply a variety of different laminates (clear, generic holographic, custom holographic, etc.) to only one side of the card.
Multi-Frequency (125kHz & 13.56 MHz) Contactless Reader and Encoder (HID Omnikey 5121 & 5125) with Contact Station
This ID card printer includes a Multi-Frequency Contactless Chip Reader and Encoder allowing you to read and encode a variety of contactless chip technologies. This ID card printer is also equipped with a contact station, allowing you to read and encode a card with an embedded contact chip.
This ID card printer is also with a contact station, allowing you to read and encode a card with an embedded contact chip.
Available in 600 dpi (23.6 dots/mm) or 300 dpi (11.8 dots/mm)
Up to 16.7 million / 256 shades per pixel
Print Ribbon and Laminate Options
Full-color, YMC*, 750 prints
Full-color with resin black, YMCK*, 500 prints
Full-color with two resin black panels, YMCKK*, 500 prints
Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 500 prints
Full-color with resin black and inhibit panel for signature or other nonprinting areas, YMCKI*, 500 prints
Full-color with fluorescing and resin black, YMCFK*, 500 prints
Full-color with two resin black and inhibit panels for signature or other non-printing areas, YMCKIKI*, 400 prints
Full-color in half panel format with a full resin black panel, Half Panel YMCK*, 1000 prints
Full-color in half panel with two full resin black panels for producing cards with full-color front and black-only back, Half Panel YMCKK*, 750 prints
Premium Resin Black, K*, 3000 prints
HDP Film Options:
Clear (Approximately 1500 prints) / Standard Holographic (500 prints) / Custom Holographic, special order (500 prints) / High Durable HDP Film (Clear) with increased durability for producing longer life cards (Approximately 1000 prints)
Thermal Transfer Overlaminate, .25 mil thick, 500 prints / PolyGuard™ Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size). All overlaminates available in clear, standard holographic design or custom holographic design
Up to 24 seconds per card / 150 cards per hour (YMC with transfer)*
Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)*
Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)*
Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*
Accepted Standard Card Sizes
CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW)
Over-the-edge on CR-80 cards
Accepted Card Thickness
030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
Accepted Card Types
ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards, polycarbonate. Note: ABS and PVC cards are not recommended for use in the HDP5600 Lamination Module***
Input Hopper Card Capacity
100 cards (.030” / .762mm)
Output Hopper Card Capacity
200 cards (.030” / .762mm)
Replaceable cleaning roller (included with each print ribbon)
64 MB RAM
Windows 10 / 8 / 7 / Vista / XP / Server 2012 / Server 2012 R2 / Server 2008 / Server 2008 R2 / Server 2003 R2 / Server 2003 R1 Mac OS X v10.10 / v10.9 / v10.8 / v10.7 / v10.6 and Linux****
Supported smart card and magnetic stripe technologies: 125kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3.
USB 2.0 and Ethernet with internal print server
65° to 90° F / 18° to 32° C
HDP5600: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
HDP5600 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
HDP5600 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD
Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD
Printer – Three years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only)
Printhead – Lifetime; unlimited pass
FARGO Secure Materials
FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only HID Secure Materials.
HID warranties are void, where not prohibited by law, when non-HID Secure Materials are used.